DIY Products

The S1 Heavy Duty Soap by Glassparency is a tough detergent that strips dirt, grime, and temporary waxes/silicas off vehicle surfaces. Foamy soap suds trap dirt and other contaminants to prevent paint abrasion and leaves a streak-free shine. For bucket washes, use 1 oz. per gallon of water. For foam cannons, use 2 ozs. in the reservoir for shaving-cream-like lather. Product application: Apply to a cool surface and avoid allowing the product to dry on a surface. Pour 1-3oz. of S1 into a bucket. Use running water to form suds. Wash with a soft mitt or designated washcloth. Rinse with clean water.

The ultimate quick detailing spray which offers high gloss and extreme beading from the first use with durability up to 3 months. Direction For Use Follow the normal wash routine to remove all dirt and grime. Spray on to one panel at a time and buff to high gloss using a clean and soft microfibre cloth. For best results and durability we highly recommend removing any previous wax or sealant to get the best possible bond (non Ceramic Coated vehicles). We advise against direct sunlight application so you have the maximum time to work with the product.

The S1 Heavy Duty Soap by Glassparency is a tough detergent that strips dirt, grime, and temporary waxes/silicas off vehicle surfaces. Foamy soap suds trap dirt and other contaminants to prevent paint abrasion and leaves a streak-free shine. For bucket washes, use 1 oz. per gallon of water. For foam cannons, use 2 ozs. in the reservoir for shaving-cream-like lather. Product application: Apply to a cool surface and avoid allowing the product to dry on a surface. Pour 1-3oz. of S1 into a bucket. Use running water to form suds. Wash with a soft mitt or designated washcloth. Rinse with clean water.

The GlassParency Ceramic Coating provides long-term protection and an enhanced appearance to the exterior surfaces of your vehicle. This Ceramic Coating application will leave your paint smooth to the touch by creating a hydrophobic, slick, and glossy surface. Features & Benefits: Protects paint from Water Spotting, UV Rays, Chemical Stains & Contaminants. Ultra-Hydrophobic. Easily wipe away dirt, grime and other contaminants. Acts as a "sacrificial" layer that takes the beating of daily abuse to protect your paint. Single layer lasts 3-4 years. 2 layers last 5 years.

Easy of application, amazing hydrophobic effectiveness, outstanding wet coat gloss, honestly I could go on and on about the huge benefits this product would give anyone from the experienced detailer to the weekend warrior. The versatility of Aqua means it is ideal for painted, plastic, chrome, vinyl and glass surfaces imparting an extra deep high gloss shine, unrivalled fast drying action, free from spotting or streaking in the rain. Aqua is very economical as it can be used neat as a spray on and pressure rinse off hydrophobic wet coat providing a barrier against rain, splashes, dirt and road debris for up to 12 weeks. Diluted with either hot or cold water to our specific ratio it can be used to top up the repellent properties every 2-4 weeks. Dilution in a bucket is also a great way to use this product as it can then be applied in the same way as a shampoo. If you want even more options for how to apply this great product how about in a low pressure washer diluted and sprayed onto the surface then rinsed off using high pressure.

Glassparency's Graphene Spray Coating is versatile and satisfyingly effective. Spray a variety of exterior surfaces to protect from contaminants and enhance the appearance of the vehicles exterior. Features & Benefits: Creates an Ultra-Hydrophobic layer of protection for your cars exterior surfaces. Protects paint from Water Spotting, UV Rays, Chemical Stains & Contaminants. Renew & Maintain the performance and appearance of Graphene or Ceramic coatings. Works as a drying agent after a car wash. Lasts up to 1 year as a standalone sealant. For a controlled application, spray Graphene Spray Coating onto a clean microfiber towel or coating applicator. You may spray the coating directly onto a panel, however, be cautious of over-spray to avoid high spots. Work the product into the panel using a cross-hatch pattern (side-to-side, top-to-bottom) to ensure even coverage. You will notice the product flash/rainbow on the surface. Continue wiping to ensure coating is fully and evenly distributed.

Iron particles have a horrible way of finding themselves embedded in your paintwork and all wheel types. There are many ways in which our pride and joy receives these unwanted defects. Vehicles leave the manufacturing plant they are more than often transported by train to their chosen dealership. During that exposed journey iron particles from the tracks are flicking up and onto your soon to be purchased vehicle created defects in the clear coat before you’ve even received it. Iron fallout is also easily collected just by general driving on everyday roads due to brake pads creating brake dust. You can easily identify these defects by using a simple trick of putting your hand inside a polythene bag and lightly rubbing your finger tips over the paintwork and alloy wheels, any roughness is due to iron fallout. Luckily there is a solution to remove these defects and get your surfaces back feeling ultra smooth again, “Iron fallout remover”. Alien Magic Wrath is an extreme iron fallout remover which is so effective it can be easily diluted to increase the economy of this powerhouse of a product. Wrath is bottled at the correct strength but can be diluted if required, it dissolves the iron it comes into contact with instantly and only the iron making it totally safe to use on all surfaces. Leaving behind a trail of deep purple dye to display its dissolving ability is complete which is then safe to rinse away leaving a surface as smooth as a baby’s bottom. It neutralise the bond with porous surfaces without the need for agitation and will not streak or stain surfaces.

Alien Magic Boost is a highly effective way to clean all types of leather without the risk of damaging it’s integrity, appearance or durability. The high foaming solution penetrates deep into the pores to clean by lifting dirt and grime to the surface, once lifted the foam can be easily removed with a clean soft microfibre towel.

Alien Magic Pure Magic is a revolutionary highly concentrated Pre-Wash vehicle cleaner that will remove tough traffic film effortlessly without any compromise. Use prior to shampooing or Snow Foaming a vehicle to remove dirt such as grit, muck, insects and bird lime. Safe for use on paintwork, glass, plastics and more. Key Benefits Highly concentrated buy yet safe formula ideal prior to snow foam or shampoo Removes tough traffic film effortlessly Safe to use on paintwork, glass, plastics and more Water-based Car Care Advice Pre wash products have an active role to play in the car wash routine, removing tough traffic film without removing wax and sealants is what sets Pure Magic apart. Its also great on vehicle door frames and sills. Direction For Use Rinse the vehicle to remove any loose debris Spray Pure Magic directly onto the surface and leave to dwell for 3 minutes Thoroughly rinse using a pressure washer ensure no product remains Do not use in direct sunlight Safe to use out of a bottle but can also be diluted up to 1 part of product and 20 parts of water for economy use.